点击图片查看原图
功能简介
可进行各种高档PVC、热转印及单面木皮的表面贴饰。
此机加工的各种PVC工件粘接牢固，不反弹翘边。沟槽线条清晰到位。
可对各种较厚木皮进行完美贴饰。
General Introduction
It is used to work various high-profile PVC, hot transfer and single veneer.
The products are of high-quality, and will not peel off. The line and groove is clear.
It can also work with various thick veneers.
设备特性
1、液压系统关键部件采用进口配件，安全可靠技术优良。
2、真空泵采用德国进口真空泵。马力强劲，故障率低。
3、操作系统采用PLC控制，大屏幕人机界面，控制方便，技术先进、自动化程序高。
4、数显电源、电压显示，清晰直观。采用微电脑温度控制仪器，精确控制温度。
Features
1、Key components in the hydraulic pressure system are imported, which is safe and reliable.
2、Vacuum pump is imported from Germany; its horsepower is strong and seldom breaks down.
3、Operation system uses PLC from foreign. The interface is broad. It is easy to learn and convenient to operate, for it is highly automatic.
4、Digitalized currency and voltage display are simple and clear. It uses computerized temperature controller so that the temperature is perfectly managed.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：9930mm*2230mm*2150mm
工作台尺（Working plate size）:2550mm*1270mm(内径inner size)
最大加工高度(Maximum height of the work piece)：50mm
额定工作压力(Raying working pressure)：正压(Positive pressure)≤0.5
负压(Negative pressure)≥-0.095Mpa
总功率(General power)：46.5kW
实际耗电(Actual power consumption)：约(about)15kW
整机重量(Weight)：10T
