点击图片查看原图
- 产品品牌：东莞拓荒牛
功能特点|Functions and special feature
中瑞技术合作产品，采用高转速（60000转/分钟）铣刀电机。X或Y方向钨钢刀高速刻线
A product of Sino-Swiss technologies,servomotors are imported from Switzerland.It runs at the rotary speed up to 60,000rpm.Tungsten steel knife high-speed scribed line.
采用意大利AMT直线导轨作为传动轨道，保证机器高速运转平稳且精度高。
AMT straight-line guide rails from ltaly are used as drive rails to ensure the machines will run in a steady manner at utmost accuracy.
采用日本松下电机控制铣刀上下运动，可随意控制铣刀的下刀深度，对于有特殊要求的沟槽深度切割，即可由电脑控制切割任意深度。
Using Servo-motor from Panasonic,to control up,down. With computerized controls the depth of engraving,it enable the control of width and depth of the lines precisely according to the need users.
机器有三个功能头：高速铣刀头、钨钢刀头。可切割和刻线15mm以下的导光板，钨钢刀头可根据材料的高低自动调节深浅度。
The machine has three function heads:high speed milling router, Tungsten steel knife,to enable engraving and cut maximum 15mm acrylic board.Tungsten steel knife can be adjust automatically to control the size of groove,engraving lines.
整机数据线全部采用德国进口。
Date wire all imported from Germany.
机器台面采用美国进口纤维板，透气性好，耐用，不易变形。
Table mat are imported from USA,the fiber board are durable,with good,permeability,very stable in thickness and shape.
由最稳定的以太网口用网线传输数据，并可直接连接AI软件以及Autocad,Coraldraw等所有软件输出
Date is transfer by Ethernet,the most stable method.File can be exported to machine directly from Adobe Illustrator,Coraldraw without conversion to maintain maximum accuracy.
设有安全装置（人手进入红外线范围以内，机器自动停止）。
Ultra Red Light sensor are equipped for user friendly and safety(machine automatically stop when perator's hand into the working area).
速度快，最快每秒可达到1500mm。
Machine can ruu at the maximum speed of up to 1500mm per second.
直接在机器上控制所有微调功能，包括图档自动优化功能，无需另配多一台电脑。
All fine tuning can be made with control penal on the machine.
可由红外线激光灯定位切割任意新起点，快速而又准确。
Red Ultra-light positioning device for printed work can be cut accurately in easy and quickest way.
NewBull led light guide plate scribed line machine(fill domestic blank products)
| 技术参数/型号 | NB-1209L | NB-2513L | NB-3015L | NB-2513XL | NB-3020XL |
| Technical information/model | |||||
| 工作特性 | 电脑操作与切割机同时进行，快速完成数据传输，可连续使用 | ||||
| Operation properties | Computer operation and cutting machines can be used simultaneously for quick data transmission capable of continuous operations | ||||
| 切割速度 | 最快可达2700mm/s | ||||
| Cutting speed | Maxi 1500mm/s | ||||
| 切割厚度 | ≦15mm | ||||
| Cutting Thickness | |||||
| 切割材料 | 可切割15mm以下的LED导光板 | ||||
| Cut materials | LED acrylic board,below 15mm | ||||
| 笔数 | 8组不同的笔画：半刀、全刀切割、X和Y方向钨钢刀高速刻线 | ||||
| Number of pens | 8 different groups of strokes,half Cut,full Cut,Tungsten steel knife high-speed scribed line | ||||
| 定位方式 | 红外线激光灯 | ||||
| Positioning device | Red Ultra-Light | ||||
| 固定纸的方式 | 真空吸附和气压机械固定 | ||||
| Method for fixing paper | Vacuum absorption | ||||
| 切割精度 | ±0.2mm | ||||
| Cutting tolerance | |||||
| 重复精度 | ≦0.05mm | ||||
| Repeat accuracy | |||||
| 切割圆形直径 | ≧5mm diameter | ||||
| Minimum circle | |||||
| 传输接口 | 以太网口 | ||||
| Transmission interface | Ethernet port | ||||
| 兼容软件格式 | AI软件、Autocad、Coraldraw和所有的盒型设计软件都可以直接输出，无需转换，且带自动优化 | ||||
| Format compatible | Compatibility format AI software,Autocad,Coraldraw and all box software | ||||
| 指令系统 | HP-GL和GP-GL | ||||
| Direcive system | HP-GL and GP-GL | ||||
| 数控面板 | 液晶显示和触点按键 | ||||
| Digital control panel | Liquid crystal display and contact button | ||||
| 传动材料 | 直线导轨，进口同步带 | ||||
| Transmission materials | Straight-line guide rails and imported synchronous belts | ||||
| 工作电压和功率 | 交流220V 380V ±10%，50HZ；L系列功率2kw,XL系列功率10kw；保险丝规格6A | ||||
| Supply voltage | AC 220V 380V ±10%，50HZ | ||||
| 振动刀头 | 铣刀头电机每分钟60000转 | ||||
| Vibration blade | Vibration cutter head motor at 60000rpm | ||||
| 切割面积 | 120cm*900cm | 250cm*130cm | 300cm*150cm | 250cm*130cm | 300cm*200cm |
| Cutting area | |||||
| 外观尺寸 | 165*128*970cm | 295*168*970cm | 345*188*970cm | 330*199*120cm | 380*269*120cm |
